The Super Record EPS 11s [paid link] front derailleur is a high-performance electronic shifting component designed for precision and efficiency. As part of Campagnolo’s Electronic Power Shift (EPS) 11-speed groupset, this front derailleur ensures smooth, accurate gear changes. However, proper installation, adjustment, and maintenance are crucial to maintaining its performance over time.
In this guide, we’ll cover the step-by-step installation process, fine-tuning adjustments, and essential maintenance for the Super Record EPS 11s [paid link] front derailleur. Whether you’re setting it up for the first time or troubleshooting shifting issues, this comprehensive guide will help you achieve flawless performance.
Tools Required
- Allen wrenches
- Torque wrench (for precise tightening)
- Campagnolo EPS V4 interface unit (for setup and diagnostics)
- Campagnolo EPS Power Unit
- Campagnolo EPS charging cable
- Cable ties (for wire management)
- Soft cloth and degreaser
1. Understanding the Super Record EPS 11s Front Derailleur
Before installing, it’s essential to understand how the Super Record EPS 11s [paid link] front derailleur functions. This model is an electronically controlled unit that relies on Campagnolo’s EPS system to shift precisely and automatically trim its position to prevent chain rub.
Key Features:
- Electronic Actuation: Provides fast and precise shifting with minimal effort.
- Automatic Trim: Prevents chain rub in cross-chain situations.
- High Torque Motor: Ensures consistent performance under load.
- Carbon Fiber and Titanium Construction: Reduces weight while maintaining strength.
- Waterproof (IP67 Rating): Can withstand wet and muddy conditions.
2. Step-by-Step Installation Guide
Installing the Super Record EPS 11s [paid link] front derailleur requires careful positioning and calibration to ensure accurate shifting.
Step 1: Positioning the Front Derailleur
- Attach the derailleur to the braze-on mount using a 5mm Allen key.
- Adjust the height so that the outer plate is 1-3mm above the largest chainring.
- Align the derailleur cage parallel to the chainrings.
- Tighten the mounting bolt to 5 Nm using a torque wrench [paid link].
Step 2: Connecting the EPS Wiring
- Connect the front derailleur to the EPS interface unit using the designated port.
- Route the wires carefully along the frame, using cable ties for a tidy setup.
- Ensure the EPS Power Unit is properly charged before proceeding.
Step 3: Initial EPS System Calibration
- Turn on the EPS system by pressing the mode button on the interface unit.
- Shift through all gears to allow the system to self-adjust.
- Use the EPS app or a Campagnolo diagnostic tool to check firmware updates and system status.
3. Adjusting the Super Record EPS 11s for Perfect Shifting
Once installed, the front derailleur must be fine-tuned for optimal shifting performance.
Adjusting the High and Low Limits
- The EPS system automatically trims the derailleur, but the initial setup must be correct.
- Enter adjustment mode using the EPS interface unit.
- Adjust the high limit so that the chain smoothly shifts onto the large chainring.
- Adjust the low limit to prevent chain rub on the derailleur cage in the smallest chainring.
Fine-Tuning with Micro-Adjustments
- If the chain rubs in certain gears, use the EPS micro-adjust feature to refine derailleur position.
- Press and hold the EPS mode button until the light blinks.
- Use the shift buttons to move the derailleur slightly left or right.
- Confirm settings by exiting adjustment mode.
4. Routine Maintenance for Longevity
The Super Record EPS 11s front derailleur requires periodic maintenance to function flawlessly.
Cleaning and Lubrication
- Wipe the derailleur weekly with a clean cloth to remove dirt and debris.
- Use a mild degreaser to clean the pivot points (avoid harsh solvents).
- Apply a small amount of dry lubricant to the moving parts for smooth operation.
Firmware Updates and Diagnostics
- Regularly check for Campagnolo firmware updates via the EPS interface.
- Use the EPS diagnostic tool to ensure optimal system performance.
Battery Maintenance
- Charge the EPS Power Unit at least once a month to prevent battery drain.
- Store the bike in a cool, dry place to maintain battery longevity.
5. Troubleshooting Common Issues
Even with a proper setup, minor issues can arise. Here’s how to resolve them:
1. The Front Derailleur Doesn’t Shift
- Ensure the EPS battery is fully charged.
- Check if the wiring connections are secure.
- Perform a reset using the EPS interface unit.
2. Chain Rub in Certain Gears
- Enter micro-adjustment mode and fine-tune the derailleur position.
- Check that the derailleur cage is aligned with the chainrings.
3. Delayed or Slow Shifting
- Update the EPS firmware if available.
- Clean the derailleur mechanism to remove debris buildup.
6. Comparing the Super Record EPS 11s to Other Models
The Super Record EPS 11s stands out due to its electronic precision and lightweight materials. Here’s how it compares to similar models:
| Feature | Super Record EPS 11s | Record EPS 11s | Shimano Dura-Ace Di2 R9150 |
|---|---|---|---|
| Shifting System | Electronic (EPS) | Electronic (EPS) | Electronic (Di2) |
| Material | Carbon & Titanium | Carbon & Aluminum | Carbon & Titanium |
| Weight | ~132g | ~140g | ~104g |
| Auto-Trim | Yes | Yes | Yes |
| Waterproof Rating | IP67 | IP67 | IP67 |
The Super Record EPS 11s offers the highest level [paid link] of performance within Campagnolo’s EPS lineup, featuring lighter materials and stronger shifting motors compared to the Record EPS.
Conclusion
Installing, adjusting, and maintaining the Super Record EPS 11s front derailleur is essential for smooth and precise shifting. By following the proper setup procedures, performing regular maintenance, and troubleshooting issues, you can ensure your drivetrain operates flawlessly for years to come.