How to Install, Adjust, and Maintain the TIME XPRO 12 Pedals

Posted on
in No category

The TIME XPRO 12[paid link] pedals are designed for competitive road cyclists who demand performance, precision, and durability. Installing, adjusting, and maintaining these pedals correctly is essential to ensure a smooth, efficient ride and to maximize their lifespan. This guide will provide you with step-by-step instructions to install, adjust, and maintain your XPRO 12 pedals with precision.

Installation of the TIME XPRO 12 Pedals

Before you begin, make sure you have all the necessary tools and the correct pedal for your left and right sides. The XPRO 12 pedals are equipped with the TIME ICLIC engagement system, which is designed to offer an easy clip-in and secure release.

Tools Required:

  • Pedal wrench[paid link] (or 6mm Allen key for installation)
  • Grease (preferably anti-seize grease)
  • Torque wrench[paid link] (optional, but recommended)

Step-by-Step Installation:

  1. Prepare the Pedals: Start by greasing the threads of the pedal axles lightly. Apply grease to avoid corrosion and ensure smooth installation. Be sure to use an anti-seize grease to prevent the pedals from seizing into the crank arms over time.
  2. Identify the Right Pedal: The right pedal will have the “R” marking, and the left pedal will have the “L” marking. The right pedal has a standard clockwise thread, while the left pedal has a counterclockwise thread.
  3. Thread the Pedals into the Crank Arms: Start by threading the right pedal into the right crank arm by turning it clockwise. For the left pedal, thread it into the left crank arm, turning it counterclockwise. Avoid cross-threading by ensuring the pedal is aligned correctly.
  4. Tighten the Pedals: Use a pedal wrench[paid link] or a 6mm Allen key to tighten the pedals. The recommended torque for the XPRO 12 pedals is between 12-15 Nm. If using a torque wrench[paid link], ensure the pedals are tightened properly to avoid damaging the crank arms or pedal threads.
  5. Check for Proper Tightness: After installation, check that both pedals are securely tightened, ensuring that the crank arms do not move or wobble when pedaling.

Adjusting the TIME XPRO 12 Pedals

The XPRO 12 pedals feature adjustable float, allowing cyclists to customize their pedal engagement. Adjusting the tension is essential for comfort and performance, particularly for riders who prioritize a secure yet easy clip-in and release.

Step-by-Step Tension Adjustment:

  1. Locate the Tension Screws: On the side of each pedal, you’ll find two screws for adjusting the pedal tension. These screws control the amount of force needed to clip in and out of the pedals.
  2. Loosen the Tension: To make it easier to clip in and release, loosen the screws by turning them counterclockwise. This reduces the tension and provides a looser feel.
  3. Increase the Tension: To increase the tension and make the pedals harder to release, tighten the screws by turning them clockwise. This will create a more secure clip-in experience.
  4. Fine-tune for Comfort: Adjust the tension to a level that feels comfortable to you. It should be tight enough to hold your foot securely, but not so tight that it’s difficult to release during an emergency.
  5. Test the Adjustment: Once the tension has been adjusted, clip in and out of the pedals to test the engagement. Make sure the release is smooth and responsive, and adjust further if necessary.

Maintaining the TIME XPRO 12 Pedals

Proper maintenance is key to ensuring the long-term performance of your TIME XPRO 12 pedals. Regular cleaning and lubrication will help reduce friction and wear, while checking the pedal’s internal mechanism will ensure that it stays in top shape.

Cleaning the Pedals:

  1. Wipe Down the Pedals After Rides: After every ride, wipe the pedals with a clean cloth to remove dirt, dust, and moisture. This prevents debris from building up in the pedal mechanism.
  2. Use Mild Soap and Water: For a deeper clean, use a mixture of mild soap and warm water. Avoid harsh solvents that could damage the pedal surface or seals.
  3. Clean the Cleats: Don’t forget to clean the cleats on your shoes as well. Clean cleats ensure smooth engagement with the pedal system.

Lubricating the Pedals:

  1. Apply Grease to the Axle: Periodically, apply a thin layer of grease to the pedal axle. This reduces wear on the pedal and helps prevent corrosion. Make sure not to over-grease, as excess grease can attract dirt and grime.
  2. Lubricate the Engagement Mechanism: Lightly grease the engagement mechanism of the pedal to keep the spring mechanism smooth and responsive. This ensures that the pedals will clip in and release easily.

Bearing Maintenance:

TIME XPRO 12 pedals feature high-quality bearings that provide smooth performance. However, over time, they may need servicing.

  1. Check for Smoothness: Periodically check the pedals for smoothness by spinning them by hand. If you notice any roughness or resistance, the bearings may need attention.
  2. Repack the Bearings (If Needed): If the bearings feel rough or gritty, you may need to disassemble the pedal and repack the bearings with fresh grease. This is typically a job for an experienced mechanic, but you can do it yourself with the right tools and care.
  3. Replace the Bearings: If repacking the bearings does not resolve the issue, you may need to replace the bearings. TIME offers replacement kits, or you can consult a local bike shop for service.

Conclusion

The TIME XPRO 12 pedals are a premium choice for serious cyclists looking for precise performance and durability. By following the installation, adjustment, and maintenance steps outlined in this guide, you can ensure that your pedals function optimally for years to come. Regular cleaning, lubrication, and tension adjustments will keep your pedal system in peak condition, enhancing your ride quality and extending the lifespan of your equipment.