How to Install, Adjust, and Maintain the Super Record Wireless Shifters:

Posted on
in Campagnolo, Shifters, Super Record

Tools Required [paid links]

  • 2.5mm, 3mm, and 5mm Allen wrenches
  • Torque wrench (for accurate tightening)
  • Di2 cable tool (optional, for more precise cable management)
  • Lube or grease for parts that require lubrication
  • Chain tool (for chain removal and installation)
  • Soft cloth (for cleaning components)
  • Isopropyl alcohol (for cleaning)
  • Battery charger for the wireless system
  • Cable cutters (if replacing cables)

Introduction

Campagnolo’s Super Record Wireless Shifters represent the pinnacle of shifting technology, offering cyclists a seamless, wireless shifting experience. When installed and adjusted correctly, they deliver unmatched precision and a smooth ride. This guide will walk you through the process of installing, adjusting, and maintaining your Super Record Wireless Shifters. We’ll also cover troubleshooting common issues to ensure that your shifting performance stays optimal for years to come.

1. Installation of Super Record Wireless Shifters

Installing the Super Record Wireless Shifters correctly is crucial for achieving smooth and reliable shifting performance. This section covers everything from unboxing to mounting the shifters on your handlebars.

Step 1: Unbox and Inspect

Before you start, ensure that all components are present and in good condition. This includes the shifters, batteries, cables (if applicable), and mounting hardware. Check for any visible signs of damage.

Step 2: Mounting the Shifters

The Super Record Wireless Shifters are designed to mount on drop handlebars. To install:

  • Use a 5mm Allen wrench [paid link] to attach the shifters to the handlebar clamps. Position them so that you can easily reach them while riding.
  • Tighten to the recommended torque setting—typically around 6-8 Nm.

Step 3: Install the Batteries

The Super Record shifters are wireless, but they still require batteries. Insert the batteries into the shifters following the instructions provided in the manual. Ensure they’re fully charged before proceeding.

Step 4: Wire the Front and Rear Derailleurs

The wireless nature of the Super Record system means that there are no cables to run through the frame. However, you still need to ensure the front and rear derailleurs are properly mounted and aligned. Secure the derailleur cages to the frame, then connect the power and communication cables from the shifters to the derailleurs.

2. Adjustment of Super Record Wireless Shifters

Proper adjustment ensures smooth, responsive shifting. The Super Record system features both electronic and wireless functionality, so some adjustments may differ from traditional mechanical systems.

Step 1: Adjusting the Front Derailleur

  • Shift into the largest chainring and adjust the height and alignment of the front derailleur. The cage should be about 1-2mm above the largest chainring.
  • Use the trim function on the shifter to fine-tune the front derailleur’s position.
  • Ensure the derailleur moves freely and doesn’t rub on the chainring.

Step 2: Adjusting the Rear Derailleur

  • Shift into the smallest cog and check the derailleur’s alignment with the cog.
  • Fine-tune the B-tension screw to adjust the distance between the derailleur and the cassette.
  • Ensure the derailleur moves smoothly through the entire cassette range.

Step 3: Adjusting Shifter Reach

The Super Record shifters are designed for customizable ergonomics. Adjust the position of the shifters to ensure they’re at the ideal reach for your hands and riding position.

3. Maintaining Your Super Record Wireless Shifters

Keeping your Super Record Wireless Shifters in top condition will help prolong their lifespan and ensure flawless performance. Regular maintenance is essential.

Step 1: Clean the Shifters

  • Use a soft cloth with isopropyl alcohol to gently wipe down the shifters.
  • Avoid using harsh chemicals that could damage the finish or components.
  • Periodically check for any dirt or grime buildup around the buttons or under the hoods.

Step 2: Lubricate the Derailleurs

While the shifters themselves are wireless, the derailleurs still require occasional lubrication. Use a high-quality bike lubricant to lubricate the pivot points on both the front and rear derailleurs.

Step 3: Check Battery Life and Charge Regularly

The Super Record system runs on rechargeable batteries. Always ensure the batteries are charged before long rides, and check them periodically for any sign of degradation.

4. Troubleshooting Common Shifting Issues

While Campagnolo’s Super Record Wireless Shifters are incredibly reliable, they may encounter issues over time. This section addresses some of the most common problems and how to fix them.

Issue 1: Shifter Not Responding

  • Check the battery charge. A low battery could cause the shifter to become unresponsive.
  • Ensure the wireless connection between the shifters and derailleurs is intact. Re-pairing might be necessary.
  • If the issue persists, try resetting the system by following the reset procedure in the manual.

Issue 2: Slow or Unresponsive Shifting

  • Inspect the derailleur alignment. Misalignment can cause shifting delays.
  • Check the tension in the shift cables if applicable (though the system is primarily wireless, some models may still use cables in certain configurations).
  • Clean and lubricate the derailleur pivots to ensure smooth movement.

Issue 3: Chain Dropping or Rubbing

  • Adjust the front derailleur trim to avoid chain rub.
  • Ensure the derailleur cage is positioned correctly in relation to the chainring.
  • If you notice persistent issues, check for chain wear or cassette wear, which can lead to poor shifting performance.

5. Customization and Optimization for Performance

While the Super Record Wireless Shifters come pre-configured for excellent performance, fine-tuning and customization can help you optimize them further.

Optimize Shifter Button Function

You can customize the shifting buttons to match your preferences, such as adjusting the sensitivity of shifts or swapping button functions (e.g., shifting up or down). Refer to the user manual for instructions on how to make these adjustments.

Fine-Tune Ergonomics

Customize the reach and position of the shifters to suit your riding style. Small adjustments to shifter reach can improve comfort, especially on long rides.

6. Comparison with Other Wireless Shifters

If you’re comparing the Super Record Wireless Shifters to other models, such as Shimano Di2 or SRAM eTap, there are several key differences to consider.

Weight and Performance

The Super Record Wireless Shifters are among the lightest wireless options available, making them ideal for performance-oriented cyclists. They provide crisp, quick shifts with minimal delay compared to heavier systems.

Compatibility with Other Components

The Super Record system is known for its compatibility with Campagnolo drivetrains, but it may not work seamlessly with other brand components without special adapters or modifications. When choosing a shifter, ensure it’s compatible with your drivetrain for the best results.

Price vs. Value

Campagnolo’s Super Record Shifters are positioned as a premium offering, often priced higher than competing models. However, their performance and durability make them a worthy investment for riders who prioritize top-tier performance and light weight.

Conclusion

The Super Record Wireless Shifters offer an excellent balance of performance, precision, and customization. By following the installation, adjustment, and maintenance tips in this guide, you can ensure that your shifting experience is as smooth and efficient as possible. Whether you’re looking to optimize your setup or troubleshoot common issues, maintaining your Super Record Shifters will keep them running like new for years to come.